SINK and UTILITY DRAINS

SINK DRAINS

Available in straight and 90° configurations, these drains are designed for 1" and 3/4" tubing. Models SW-3, SW-4 and SW-6 are bright chrome plated, non-corrosive plastic.

Part No.	Model No.	Tail	Flange	Cut-Out	Retail
907000	SW-1	Straight - 1" I.D. (25.40mm)	1-3/4" (44.45mm)	1-5/16" (33.33mm)	$6.05
907014	SW-2	90° - For 1" I.D. (25.40mm)	1-3/4" (44.45mm)	1-5/16" (33.33mm)	$7.95
907015	SW-3	Straight - 1-1/2" screw (38.11mm)	2-7/8" (73.02mm)	2" (50.80mm)	$14.25
907016	Fits All	Replacement Sink Stopper	Fits SW-3 thru SW-7	Fits SW-3 thru SW-7	$7.05
907017	SW-4	90° - For 1" I.D. (25.40mm)	2-7/8" (73.02mm)	2" (50.8mm)	$25.50
907013	SW-5	(same as SW-1, for 3/4" I.D.) (19.05mm)	1-3/4" (44.45mm)	1-5/16" (33.33mm)	$6.35
907022	SW-6	Straight - for 1" I.D. (25.40mm)	2-7/8" (73.02mm)	2" (50.80mm)	$24.05
907027	SW-7	(same as SW-6, for 3/4" I.D.) (19.05mm)	2-7/8" (73.02mm)	2" (50.80mm)	$21.90

SW-5

SW-7

UTILITY DRAIN D-1

Fully threaded acetal utility drain. Thread length: 1-3/8" (34.92mm)Thread size: 1" (25.14mm)

Part No.	Model No.	Retail
907028	D-1	$5.75

Home I Dealer Locator I About Us I Videos I New Products I Policies I Contact Us I Sitemap I
Facebook I Newletter Sign Up



	Secure Online Shopping