ABOUT US I LESIURE FURL I ONLINE CATALOG I RESOURCES I CONTACT US

 

[ Resources ][ Shipping Weights ][ Tech Tips ][ Boat Show Schedule ][ Literature ]

 

Tech Tip

 

Marelon®
6/11/02


How to get to 1-1/8” hose on 1”, 1-1/4” or 1-1/2” seacocks and valves

 

Forespar® now makes a 1-1/2” female thread to 1-1/8” hose barb tailpipe in Marelon®. Our part is #905015. This straight barbed tailpipe can be used on any of our MF 850 1” through 1-1/2” valves or Integrated Plumbing System valves with the same sizes female tops.

 

Here’s how:

If you have a 1” valve use #901047 MTC 24-16 1” to 1-1/2” male threaded adaptor (page 51, 2002 catalog) and attach the #905015 1-1/8” tailpipe to the 1-1/2” male threads.

 

If you have a 1-1/4” valve use #901048 MTC 24-20 1-1/4” to 1-1/2” male threaded adaptor and attach the #905015 1-1/8” tailpipe.

 

If you have a 1-1/2” valve use #901049 MTC 24-24 1-1/2” male threaded adaptor and attach the #905015 1-1/8” tailpipe.

 

Remember to use Teflon® pipe tape on all connections.

 

We can also provide Vented Loops and “Y” valves with 1-1/8” barbs.

 

 

ABOUT US I LEISURE FURL I MARELONฎ PLUMBING I SAILBOAT & MARELONฎ CATALOGS I NEW PRODUCTS I RESOURCES I CONTACT US I HOME I SITE MAP I VIDEOS

 

QUICK LINK GUIDE: Leisure Furl, Nova Lift, Nova Davit, Davit, Whisker Pole, Spinnaker Pole, Mast, Hoyt Jib Boom, Lightning Master, Lanocote, Yacht Rod, Boom Vang, Tiller Extension, Winch, Railfast, Man Overboard Pole, Mast Lights, Marelon, Seacocks, Thru-hull Fittings, Vented Loops, Marine Smart Valves, ROV Valves, Ball Valves, Water Strainer, Elbows, Tailpipes, Cleats, Banana Sprit

 

ฉ 2008 Forespar Corporation All rights reserved

If you experience any technical difficulties with this site, please contact our webmaster.

Art the Orange County Wedding DJ