LANOCOTE®
How does LanoCote® work? LanoCote® works on these five basic principals: displaces water, absorbs corrosion, forms moisture barrier, penetrates and has high lubricity. LanoCote® prevents dissimilar metal galvanization. LanoCote® is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote® is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery. Applied during assembly, LanoCote® will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote® also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc.

Apply LanoCote® on turnbuckle and shackle threads to prevent galling.

Apply LanoCote® on your plumbing system valves to keep them operating smoothly.

LONG TERM CORROSION CONTROL

CHOICE OF MARINE PROFESSIONALS

Spray LanoCote® on electrical terminals to prevent corrosion.

LanoCote® is a registered trademark of Lanocote, Inc.

ASSORTED CLEATS

Molded from high-strength Marelon®, Forespar's cleats have been thoroughly tested by independent laboratories and manufacturers of yachts and power boats all over the world. Their strength, light weight and low cost have contributed to their increased use in the marine industry. The use of Marelon® allows our cleats to take up the curve of a deck without breaking, while maintaining strength and resisting abrasion - will not soften on hot days or freeze in winter.

EXIT BOX

This new exit box is made for use with the new high-tech fibers. Forespar® uses this new exit on all trip lines and topping lifts. It is suitable for aluminum and ideal for carbon fiber poles as there is no metal to metal contact to promote corission. The axles are stainless steel molded into a strong Marelon® cheek with no moving parts.

Flange size: 3-1/4" L x 7/8" W

Cut-out size: 2" x 11/16"

Maximum line size: 1/4"

Uses two 3/16" flat head fasteners.

Return to

Sailboat table of contents

Marelon® table of contents